Elipse/GVS Masks
GVS Elipse P3 Masks
test
Skip to Content
- Compare ()
- Email Us | Tel 01435 510749 | Monday - Friday / 9am - 5pm
- Contact Us
- BLOG
- Create an Account
FREQUENTLY ASKED QUESTIONS
01: Is it GVS Elipse or GVS Eclipse?
The correct spelling is GVS Elipse, with no “c”. Many people search for GVS Eclipse, but the brand is Elipse, made by GVS. Elipse masks are low-profile half mask respirators with P3 particle protection or A1P3 combination filters for vapours and particles. Our range includes the Integra and the P3 and A1P3 half masks.
02: What is an Elipse GVS respirator used for?
An Elipse respirator is a half mask from GVS, designed to be light and low profile. The P3 versions protect against fine dust, fume and mist, and the A1P3 versions also protect against organic vapours at low concentrations. They suit trades such as construction, joinery and painting. Choose the model to match your risk assessment, and face fit test it.
03: What does A1 P3 mean on a mask?
A1 means the filter protects against organic gases and vapours with a boiling point above 65°C, at low capacity. P3 means a particle filter with at least 99.95% efficiency, the highest class. An A1 P3 mask combines both, protecting against vapours plus dust, mist or fume. R and D markings relate to reuse and clogging tests.
04: Should I choose an Elipse P3 mask or an A1 P3 mask?
Choose a P3 mask if the hazard is particles only, such as fine dust, fume or mist. Choose an A1 P3 mask if you also face organic vapours, such as from solvents or solvent-based paints. Gas filters have limits, so check the substance’s boiling point and exposure level, and use air-fed equipment for high concentrations or unknown atmospheres.
05: What is the Elipse Integra half mask?
The Elipse Integra is a half mask covering nose and mouth, available with P3 filters or A1-P3 combination filters. It is a reusable respirator designed to be lightweight and comfortable for longer wear. Check the listing for sizing and filter details, and face fit test each wearer before use.
06: Are GVS Elipse masks reusable?
Models marked R or RD, such as the Elipse A1P3 RD half mask, are reusable within the manufacturer’s limits. Reuse means cleaning the mask, storing it properly and replacing filters when breathing gets harder, when they’re damaged, or when you taste or smell contaminants. Gas filters also have a limited life once opened, so follow the guidance for your GVS mask.
07: What size Elipse mask do I need?
Elipse masks are offered in sizes such as small/medium and medium/large, so check the size shown on each listing. A mask that is too large or small can leak, so use the size guide and face fit test each wearer for the model and size they will use. If you’re between sizes, test both before ordering.
08: Which filters fit an Elipse respirator?
Elipse masks use GVS filters, and our listings show compatibility with the SPR316 and SPR341 filter types. Use only filters named as compatible with your exact mask, and match the class to your hazard, such as P3R for particles or A1P3R for vapours plus particles. Don’t mix filters from other brands, as this can break the seal and the approval.
09: Is an A1 P3 mask suitable for spray painting?
An A1 P3 mask suits many solvent-based paints at low concentrations, because A1 filters absorb organic vapours and P3 filters trap overspray. It isn’t suitable for isocyanate or two-pack paints, which usually need air-fed equipment, or for confined spaces. Check the safety data sheet, and replace filters when you can taste or smell paint.
10: Can I wear an Elipse mask with safety glasses or a welding helmet?
Elipse masks are designed with a low profile, which helps them sit alongside safety eyewear and under visors, but compatibility varies. Check that glasses, goggles or a helmet don’t lift the mask edge or pull the straps, and that eye protection doesn’t fog. Do a fit check with all PPE on, and face fit test with it worn.